7307 92 Gängade knärör, böjar och muffar

Import till EU

EUDR

Omfattas inte

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Nummer under 7307 92

• 7307 92 10 Muffar
• 7307 92 90 Knärör och böjar

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• FEMALE ELBOW ADAPTOR THREADED WITH TWO NUTS. MADE OF STEEL

  7307 92 90 · IE 2018 · IEBTI18NT-14-7153-02

• ADJUSTABLE 90 DEGREE MALE ADAPTOR, THREADED WITH ONE NUT. MADE FROM STEEL

  7307 92 90 · IE 2018 · IEBTI18NT-14-7153-03

• STEEL THREADED NORMAL BEND. PRESSED STEEL STAMPING INTERNALLY THREADED AT BOTH ENDS. USED ON THE END OF A PIECE OF STRAIGHT CONDUIT TUBE TO FORM A RIGHT ANGLE. INTENDED FOR ELECTRICAL CONDUIT, THE FITTING FORMS PART OF THE BORE.

  7307 92 90 · GB 2017 · GB503357962

• A SEAMLESS DRAWN STEEL PIPE FITTING , THREADED AT ONE END. THIS IS USED AS A CONNECTION FOR FUEL TRANSPORT.

  7307 92 10 · GB 2015 · GB502256486

• A CARBON STEEL HYDRAULIC SLEEVE USED PRIMARILY ON DIESEL POWER TRANSMISSION MACHINES, CONSTRUCTION AND AGRICULTERAL EQUIPMENT

  7307 92 10 · GB 2014 · GB502118795

• A THREADED SLEEVE. MADE OF STEEL (BUT NOT STAINLESS STEEL). OF AN OVERALL DIAMETER BETWEEN 0.267 AND 2.409 INCHES. OVERALL LENGTH BETWEEN 0.34 AND 1.19 INCHES. USED FOR HYDRAULIC COMPONENTS IN ENGINE AND EQUIPMENT SYSTEMS.

  7307 92 10 · GB 2014 · GB501823875

• MILD STEEL BEND. NOT CAST. THREADED AT BOTH ENDS. FORMED WITH A CIRCULAR SHAPED BEND. WITH A DIAMETER OF 17.1MM. USED TO PROTECT PRESSURE GAUGES FROM HEAT OR STEAM DAMAGE. TRADENAME: 3/8 INCH MILD STEEL RING SYPHON

  7307 92 90 · GB 2009 · GB118741469

• MILD STEEL U SHAPED BEND. NOT CAST. THREADED AT BOTH ENDS. WITH A DIAMETER OF 17.1MM. USED TO PROTECT PRESSURE GAUGES FROM HEAT OR STEAM DAMAGE. TRADENAME: 3/8 INCH MILD STEEL U SYPHON

  7307 92 90 · GB 2009 · GB118741567