8309 90 Andra slag

Import till EU

EUDR

Omfattas inte

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Nummer under 8309 90

• 8309 90 10 Blykapsyler, för flaskor; aluminiumkapsyler med en diameter av mer än 21 mm, för flaskor
• 8309 90 90 Andra

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• High security bolt seal for container cargo shipments. Designed for container cargo shipments. Rail, sea or air freight. Storage doors. Carbon steel with zinc chromate finish and polypropylene coating. Bolt: 18.8mm dia head and 7.9mm dia shaft Bush: 18.1mm dia head reducing to 12.0mm

  8309 90 90 · IE 2020 · IEBTI20NT-14-9474-DEC

• Fixed length metal seal manufactured from tin-plated steel. Length: 18cm Strap width: 10mm For use on cargo, containers, trailers, tankers. Provides evidence of tampering.

  8309 90 90 · IE 2020 · IEBTI20NT-14-9475-DEC

• ALUMINIUM TAB (RING PULL) FOR INSERTION INTO ALUMINIUM CAN END WITH A DIAMETER OF LESS THAN 99,00 MM.

  8309 90 90 · IE 2019 · IEBTI19NT-14-8494

• A POLYLAMINATE CAPSULE FOR A BOTTLE OF WHISKY. IT IS ALUMINIUM LAMINATED WITH PLASTIC. IT COVERS THE LID OF THE BOTTLE AND IS MACHINE APPLIED (TWISTED ON) NO HEAT IS USED. THE DIMENSIONS ARE 34 X 45MM. IT IS BLACK IN COLOUR EMBOSSED WITH GOLD DECORATION/WRITING. THERE ARE TWO BREATHER HOLES ON THE TOP OF THE CAPSULE.

  8309 90 10 · GB 2018 · GBBTI504095961

• A CHROME PLUG AND CHAIN SET. IT IS USED IN SINKS, BASINS OR BATHS. AVAILABLE IN TWO SIZES 1.25 INCH AND 1.5 INCH. ONCE INSERTED INTO THE SINK, THE WATER IS RESTRICTED FROM FLOWING DOWN THE WASTE WATER DRAIN. THE PIECE CONSISTS OF A BRASS CHROME PLATED PLUG AND A STAINLESS STEEL CHAIN WITH A BOLT AND WASHER TO CONNECT TO THE SINK. THE CHAIN IS CONNECTED TO THE PLUG BY AN “S” CLIP

  8309 90 90 · IE 2017 · IE17NT-14-5686-02

• AN ALUMINIUM CAN END SHELL. THIS IS THE FIRST STAGE IN THE MANUFACUTRE OF THE COMPLETED CAN END. IN THE STAGE OF THE PROCESS THE "SHELL" IS FED INTO THE CONVERSION PRESS WHERE THE TAB IS INSERTED ONTO THE SHELL.

  8309 90 90 · IE 2017 · IE17NT-14-5227-03

• BEVERAGE CAN ENDS, FOR USE IN TWO PIECE ALUMINIUM CAN. IT HAS A DIAMETER OF 50MM WHEN SEAMED ON THE CAN

  8309 90 90 · IE 2017 · IE17NT-14-5228-01

• BEVERAGE CAN ENDS, FOR USE IN TWO PIECE ALUMINIUM CAN. IT HAS A DIAMETER OF 52MM WHEN SEAMED ON THE CAN.

  8309 90 90 · IE 2017 · IE17NT-14-5228-02