8412 21 80 Andra

Import till EU

Tullsats (tredjeland)

2,7 % Ett Taric-nummer har avvikande sats vid särskild användning.

EUDR

Omfattas inte

Taric-nummer (10 siffror)

4

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Närliggande KN-nummer

• 8412 21 20 Hydrauliska system

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• HYDRAULIC CYLINDER TO BE USED WITH A LATHE. PRODUCT COMPRISES OF A HYDRAULIC CYLINDER MADE FROM CAST ALUMINIUM WITH STEEL PIPE ATTACHMENTS AND RUBBER SEALS. THIS IS USED TO ACTUATE THE JAWS ON A CHUCK BY PULLING OR PUSHING FORWARD AND BACK AS PART OF A CHUCKING SYSTEM, SPECIFICALLY IN A LATHE OR MILLING MACHINE. THE PRODUCT CONTAINS BASIC ELECTRONIC SENSORS THAT LET THE LATHE / MILLING MACHINE…

  8412 21 80 · GB 2017 · GB503488550

• ACTUATOR ASSEMBLY FOR BOEING 737 CIVIL AIRCRAFT. THIS IS A HYDRAULICALLY CONTROLLED UNIT WHICH OPERATES LEADING EDGE SLATS POSITION C INSTALLED ON SLATS 2 & 5. THE UNIT DOES HAVE A LINEAR ACTING CYLINDER BUT DOES NOT COMPRISE OF AN ELECTRIC MOTOR, OIL TANK OR CONTROL VALVES. MANUFACTURED BY BOEING USA

  8412 21 80 · GB 2016 · GB502813481

• A HYDRAULIC CYLINDER, LINEAR ACTING, MADE OF STEEL, WHICH HYDRAULICALLY MOVES A LIFT ELEVATOR UP AND DOWN. COMPOSITION: STEEL, ALLOY, PLASTIC AND RUBBER.

  8412 21 80 · GB 2014 · GB501870178

• A HYDRAULIC CYLINDER, MADE OF STEEL, WHICH HYDRAULICALLY MOVES DIE BACK AND FORWARD ON A HIGH PRESSURE DIE CASTING MACHINE

  8412 21 80 · GB 2014 · GB123793270

• A HYDRAULIC CYLINDER MADE OF STEEL. IT IS USED FOR HYDRAULIC CONTROL OF CLAMPING PLATES ON A HIGH PRESSURE DIE-CASTING MACHINE.

  8412 21 80 · GB 2014 · GB123547876

• A LINEAR VALVE ACTUATOR FOR USE WITH GATE VALVE APPLICATIONS. IT IS A HYDRAULIC OIL FILLED ACTUATOR WITH THE PRESSURE MEDIUM TYPICALLY PROVIDED FROM HIGH PRESSURE GAS TAKEN DIRECTLY FROM THE PIPELINE. IT CAN ALSO BE POWERED HYDRAULICALLY OR BY NITROGEN PRESSURE VESSELS. LINEAR MOTION RANGE TO 72 INCHES (182.9 CM). THE ACTUATOR IS MOUNTED DIRECTLY ON THE VALVE, CENTERED ON THE VALVE STEM. THE…

  8412 21 80 · GB 2011 · GB120982089

• HYDRAULIC CYCLINDERS FOR USE IN HYDRAULIC STEERING SYSTEMS IN BOATS. THE CYCLINDER DRUM IS THE MAIN RESEVOIR FOR THE HYDRAULIC FLUID. THE CYCLINDERS ARE MADE OF BRASS AND STAINLESS STEEL.

  8412 21 80 · IE 2006 · IE-03NT-14-2457-4A1