8477 80 99 Andra

Import till EU

Tullsats (tredjeland)

1,7 %

EUDR

Omfattas inte

Taric-nummer (10 siffror)

2

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Närliggande KN-nummer

• 8477 80 11 Maskiner för omvandling av reaktiva hartser
• 8477 80 19 Andra
• 8477 80 91 Fragmenteringsmaskiner
• 8477 80 93 Blandare, knådare och omrörare
• 8477 80 95 Skärmaskiner och spaltmaskiner

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• 3D-penna Penna i form av en elektriskt apparat (längd 180 mm och en största diameter på 40 mm) som arbetar med snabbstelnande plast. Pennan laddas med ett enfärgat plaststrå som värms upp och matas ut snabbt eller långsamt via knappval. Pennan ansluts till ett vägguttag med hjälp av en nätadapter och en LED-indikator visar när rätt temperatur uppnåtts. På pennan finns en knapp för att välja ABS…

  8477 80 99 · SE 2014 · SETIL 2014-10177

• THE PRODUCT IS A 3D PRINTER THAT USES FUSED FILAMENT FABRICATION PROCESS WHICH PROVIDES A CONTINUOUS FILAMENT OF A THERMOPLASTIC MATERIAL. THIS IS FED FROM A LARGE COIL, THROUGH A MOVING, HEATED PRINTER EXTRUSION HEAD. MOLTEN MATERIAL IS FORCED OUT OF THE PRINT HEADS NOZZLE AND IS DEPOSITED ON THE GROWING WORK PIECE. THE HEAD IS MOVED UNDER COMPUTER CONTROL, TO DEFINE THE PRINTED SHAPE.…

  8477 80 99 · GB 2017 · GBBTI503532191

• A 3D DRAWING PEN TO ENABLE 3D IMAGES TO BE DRAWN BY HAND. SUPPLIED WITH CARTRIDGES - ONE CONTAINING BLUE PLASTIC LIQUID AND THE OTHER CONTAINING RED PLASTIC LIQUID. ONE OF THESE COLOURS ARE PUT INSIDE THE PEN ONCE A NOZZLE HAS BEEN INSERTED. BY GENTLY SQUEEZING THE CARTRIDGE THE LIQUID FLOWS OUT OF THE NOZZLE SO THE IMAGE CAN BE CREATED. A CURING LIGHT AT THE END OF THE PEN HEATS THE LIQUID AND…

  8477 80 99 · GB 2016 · GB503133601

• MACHINES FOR CASTING OR FOR SURFACE MODIFICATION OF PLASTIC MEMBRANES OF HEADING 3926

  8477 80 99 · IE 2015 · IE15NT-14-3095

• A STANDALONE DESKTOP 3D PRINTER FOR PRODUCING A PHYSICAL 3-DIMENSIONAL SHAPES BY HEATING THE BIO-PLASTIC FILAMENT (DEPRIVED FROM CORN) IN THE PRINT-HEAD WHICH MOVES AROUND, LAYERING THE PLASTIC ONTO THE PRINTING TABLE. THE TABLE LOWER DOWN SO THAT THE PRODUCT IS FORMED IN LAYERS. FEATURES INCLUDE, BUILD VOLUME (APPROXIMATE) 25x 20 x15 CM, INTERFACES USB, SD SLOTS, WI-FI AND ETHERNET. MINIMUM…

  8477 80 99 · GB 2015 · GB502255783

• AN ASSEMBLY MACHINE FOR THE MANUFACTURE OF INSULIN PEN NEEDLES. IN THE ASSEMBLY MACHINE THE PLASTIC HUB AND THE CANNULA ARE ASSEMBLED AND A PLASTIC COVER IS ADDED BEFORE THE PEN NEEDLE UNIT IS SEALED WITH A TEARDROP LABEL.

  8477 80 99 · IE 2011 · IE10NT-14-918-02

• A HEAT SEAL PRESS FLOOR STANDING LAMINATOR MACHINE. IT PRODUCES PROTECTED DOCUMENTS BY SEALING THEM WITHIN A PLASTIC POUCH, WHICH IS PASSED THROUGH ROLLERS IN A CONTINUOUS MANNER, ENABLING LARGE PAPER PRODUCTS TO BE LAMINATED. DIMENSIONS 58 X 50 X 25 INCHES. WEIGHT 503 LBS. MAXIMUM FILM WIDTH 43 INCHES.

  8477 80 99 · GB 2010 · GB119422679

• PRODUCT IS A HYDRAULICALLY POWERED MACHINE THAT FUSES PIPES EITHER ABOVE GROUND OR IN THE DITCH. THE CARRAIGE JAWS ARE CLAMPED AROUND THE PIPE AND THE HYDRAULIC FACER IS PLACED INTO POSITION BETWEEN THE TWO PIECES OF PIPE. THE PIPE ENDS ARE FACED FLAT AND PARALLEL TO EACH OTHER TO GIVE A GOOD MATING SURFACE FOR FUSION. BOTH PIPE ENDS ARE BROUGHT TOGETHER AGAINST THE HEATER. THE PIPE SOAKS…

  8477 80 99 · GB 2008 · GB117642281