8481 40 90 Andra

Import till EU

Tullsats (tredjeland)

2,2 %

EUDR

Omfattas inte

Taric-nummer (10 siffror)

2

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Närliggande KN-nummer

• 8481 40 10 Av gjutet järn eller av stål

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• A PRESSURE RELIEF VALVE WHICH IS A SPARE PART SPECIFICALLY MADE FOR A WATER HEATER. THE WATER HEATER IS DESIGNED TO BE MOUNTED UNDER THE FLOOR OF A CARAVAN AND HEAT 8 LITRES OF WATER TO 72 DEGREES CENTEGRADE USING A 1.35 KW LPG BURNER OR A 1.5KW MAINS ELECTRIC ELEMENT. THE VALVE IS MADE OF MOULDED PLASTIC.

  8481 40 90 · GB 2015 · GB502782853

• AUTOMATIC BY PASS SAFETY VALVE FOR USE IN A DOMESTIC CENTRAL HEATING SYSTEM. IF PRESSURE IN THE SYSTEM IS EXCEEDED THE VALVE OPENS AND RELEASES WATER. MADE FROM BRASS. SIZE 22MM.

  8481 40 90 · IE 2013 · IE13NT-14-1258-02

• 3 BAR SAFETY VALVE. MADE FROM BRASS. SIZE 1/2". IF PRESSURE IN THE SYSTEM IS EXCEEDED THE VALVE WILL OPEN TO RELEASE WATER.

  8481 40 90 · IE 2013 · IE13NT-14-1258-04

• A DOWNHOLE SAFETY VALVE USED IN DRILL STEM TESTING. IT IS A SINGLE SHOT BALL VALVE RUN IN THE OPEN POSITION. IF REQUIRED THE BALL CAN BE CLOSED BY APPLYING ANNULUS PRESSURE TO BURST A HIGH ACCURACY RUPTURE DISC. ONCE THIS PATH IS OPENED THE ANNULUS PRESSURE FORCES AN OPERATING MANDREL IN AN UPWARD DIRECTION TO ROTATE THE BALL VALVE TO THE CLOSED POSITION. ONCE CLOSED THE BALL WILL ISOLATE WELL…

  8481 40 90 · GB 2013 · GB122435408

• PRESSURE RELIEF VALVE 6 BAR 1/2 INCH FEMALE CONNECTOR. MADE FROM GLASS FILLED POLYPROPYLENE. HOT WATER MAXIMUM PRESSURE 6 BAR WITH MAXIMUM HOT WATER TEMPERATURE 85 DEGREES CENTIGRADE.

  8481 40 90 · GB 2011 · GB501033226

• THE PRODUCT IS A DIRECT ACTING PRESSURE / VACUUM RELIEF VALVE (OR BREATHER VALVE) THESE ARE A SPECIAL TYPE OF RELIEF VALVE THAT IS SPECIFICALLY DESIGNED FOR TANK PROTECTION. THEY ARE AVAILABLE WITH FLANGED OUTLETS OR VENTED TO ATMOSPHERE. THE VALVES PREVENT THE BUILD UP OF EXCESSIVE PRESSURE OR VACUUM WHICH CAN UNBALANCE THE SYSTEM OR DAMAGE THE STORAGE VESSEL.

  8481 40 90 · GB 2010 · GB119978322

• Right angle relief valve are pressured balanced internally and pressure referenced to atmosphere. This yields insensitivity to downstream pressure and permits the valve to be used as back-pressure regulator. The valve is of stainless steel construction, proof pressure 20,000 psig, burst pressure 40,000 psig minimum. Not of cast steel.

  8481 40 90 · GB 2008 · GB117520594

• ANGULAR SAFETY VALVE. THE VALVE AUTOMATICALLY ENABLES A QUANTITY OF MEDIUM TO DISCHARGE WITHOUT THE ASSISTANCE OF ANY OTHER ENERGY THAN THE MEDIUM ITSELF.IT HAS A DOUBLE LEVER AND 2 BALANCE WEIGHTS. THE VALVE CONE CAN BE LIFTED AND TURNED. IT IS MADE FROM RED BRASS AND IS USED FOR APPLICATIONS SUCH AS LIQUIDS , STEAM AND GASEOUS MEDIA. INCLUDES A TEFLON GASKET .

  8481 40 90 · GB 2007 · GB116617284