KN-nummer 8483 40 21 Cylindriska kugghjulsväxlar och snedtandade kugghjulsväxlar

Ett Taric-nummer har avvikande sats vid särskild användning.

Taric-nummer (10 siffror): 2

Ursprungsland, förmånstull och nästa steg ›

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• SPUR GEAR MADE FROM STEEL. THE GEAR IS USED FOR DRIVING A TIP UP TABLE. THIS IS THEN USED WITHIN A HIGH PRESSURE DIE CASTING MACHINE. THE GEAR IS NOT A MACHINE SPECIFIC PART.

  8483 40 21 · GB 2014 · GB123672776

• REPLACEMENT GEAR USED FOR INDUSTRIAL CAN OPENER. USED IN QUICK SERVE RESTAURANTS. MADE FROM STAINLESS STEEL.

  8483 40 21 · GB 2013 · GB501412511

• THIS IS A SINTERED STEEL GEAR COMPONENT USED IN MEDICAL CASTORS FOR USE IN MEDICAL EQUIPMENT APPLICATIONS. IT IS IN FORM OF A CYLINDER WITH TEETH PROJECTING RADIALLY. THE EDGE OF EACH TOOTH IS STRAIGHT AND ALIGNED PARALLEL TO THE AXIS OF ROTATION.

  8483 40 21 · GB 2013 · GB501423308

• SPROCKET ASSEMBLY FOR USE SOLELY OR PRINCIPALLY WITH MINING EQUIPMENT. THE ASSEMBLY PROVIDES THE DRIVE FOR COAL CUTTING MACHINERY OPERATING ON A LONGWALL COAL FACE. IT CONTAINS A PINION (SPROCKET) OF A RACK AND PINION DRIVE SYSTEM, THE PINION BEING INTEGRAL WITHIN THE COAL CUTTING MACHINE AND THE RACK ATTACHED TO AN ARMOURED FACE CONVEYOR ON WHICH THE COAL CUTTING MACHINE IS POSITIONED. THE…

  8483 40 21 · GB 2010 · GB119781839

• A PLASTIC HELICAL TYPE GEAR. FOR USE AS A COMPONENT IN THE MANUFACTURE OF MOTOR VEHICLE POWER LOCKS. THE ARTICLE IS APPROXIMATELY 3 CM IN LENGTH WITH A HELICAL THREAD RUNNING DOWN 3/4 OF ITS LENGTH. IT IS MADE OF A MOULDED PLASTIC MATERIAL AND IS CENTRE DRILLED. THE GEAR FORMS AN INTRINSIC PART OF THE LOCKING SYSTEM.

  8483 40 21 · GB 2008 · GB117567361

• A STAINLESS STEEL GEAR. PART FOR USE IN AN ELECTRIC CAN OPENER.

  8483 40 21 · GB 2006 · GB114844185

• A GEAR RACK THAT IS PART OF A GEAR MECHANISM FOR A COMMERCIAL JUICER. IT IS A FINISHED MACHINED PART MADE OF MILD STEEL. DIMENSIONS 1/2 INCH A/F HEXAGON X 7 INCH. PITCH OF RACK IS 3/16 INCH.

  8483 40 21 · GB 2006 · GB114848075

• A GEAR MADE OF STAINLESS STEEL. A PART OF A HAND OPERATED MECHANICAL CAN OPENER FOR THE COMMERCIAL CATERING INDUSTRY.

  8483 40 21 · GB 2006 · GB114844577