8544 20 00 Koaxialkabel och andra elektriska koaxialledare

Import till EU

Tullsats (tredjeland)

3,7 %

EUDR

Omfattas inte

Taric-nummer (10 siffror)

2

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• CO-AXIAL CABLES. THE CABLES COME WITH VARIOUS CONNECTORS AT ONE OR BOTH ENDS. THE CABLES ARE A MIX OF SINGLE COPPER CORE WIRE AND INSULATED WITH POLYETHLENE AND A PVC JACKET OR CAN BE COPPER-CLAD ALUMINIUM WIRE INSULATED WITH AN ALUMINIMUM BRAID AND NON-HALOGENATED PE JACKET.

  8544 20 00 · IE 2024 · IEBTIIENEN004-2024-BTI112

• EXTERNAL ANTENNA CABLE. A COAXIAL CABLE THAT CONNECTS A RADIO TO AN ANTENNA, WITH A N-TYPE CONNECTOR ON ONE END OF THE CABLE AND AN NEX-10 ON THE OTHER. DIMENSIONS ARE SPECIFIC TO THE CUSTOMER REQUIREMENTS.

  8544 20 00 · IE 2021 · IEBTI21NT-14-1252-DEC

• Semi Flexible coaxial cable on a plastic reel. It has an Impedance of 50 Ohm. It is used to route electrical signals through the antenna. It has an inner conductor of Silver-Plated Copper which is surrounded by a PTFE Dielectric. The outer conductor is a Tin Soaked Copper Braid. The complete cable has an outer jacket which is typically LSZH or FEP. For a maximum operating voltage of 1900 Volts.…

  8544 20 00 · IE 2021 · IEBTI21NT-14-1217-DEC

• CO-AXIAL INTERFACE CABLES. THIS HARNESS OF CABLES AND CONNECTORS LINKS THE FACE PLATE OF THE ANTENNA TO THE MULTI-STRIP BOARDS INSIDE THE ANTENNAS REMOTE ELECTRICAL TILT (RET) MODULE. THE CABLES ALLOW THE CLIENT TO CONTROL THE TILT OF THE ANTENNA VIA THE RET. THE CABLES ARE A MIX OF INSULATED, SINGLE CORE COPPER WIRE, WITH VARIOUS CONNECTORS.

  8544 20 00 · IE 2021 · IEBTI20NT-14-9866-DEC

• CO-AXIAL CABLE. THESE INTERNAL CONNECTOR CABLES ARE USED TO DELIVER ELECTRICAL SIGNALS FROM ONE PART OF THE ANTENNA TO ANOTHER. THE CABLE IS CUT TO THE LENGTHS REQUIRED TO SUPPORT PHASE MATCHING. THE INSULATED CABLE CONSISTS OF AN INNER PLATED COPPER CONDUCTOR WHICH IS SURROUNDED BY PTFE DIELECTRIC WHICH IN TURN IS SURROUNDED BY AN OUTER COPPER BRAID CONDUCTOR. ALL OF THIS IS CONTAINED WITHIN AN…

  8544 20 00 · IE 2021 · IEBTI21NT-14-1087-DEC

• CO-AXIAL CABLES. THESE CABLES ARE USED AS INTERNAL PHASED TRANSMISSION LINES (IPTLS) WHICH CONTROL THE ELECTRICAL TILT OF THE ANTENNA AND LINK THE DIPOLE DIVIDER TO THE DIPOLE. EACH IPTL IS PERMANENTLY FIXED (SOLDERED) INSIDE THE ANTENNA DURING THE PRODUCTION PROCESS. THE CABLES ARE A MIX OF COPPER WITH PTFE INSULATOR AND TIN SOAKED COPPER BRAID WITH LSZH OR FEP JACKET. THERE ARE NO CONNECTORS.

  8544 20 00 · IE 2021 · IEBTI21NT-14-1170-DEC

• COAXIAL CABLE WITH CONNECTOR. IT IS FITTED WITH AN IPEX MHFI TO SMA(F) BULKHEAD STRAIGHT CONNECTOR AND IS USED AS AN ANTENNA CONNECTION CABLE.

  8544 20 00 · IE 2019 · IEBTI19NT-14-8608-02

• COAXIAL CABLE. COMPRISES OF DIAMETRIC MATERIAL FOAM PE, INNER CONDUCTOR MATERIAL COPPER, OUTER CONDUCTOR MATERIAL CORRUGATED COPPER, DIAMETER DIELECTRIC 24.13MM, DIAMETER OVER JACKET 27.991MM. ELECTRICAL CHARACTER TICS IMPEDANCE 50 OHM, CAPACITANCE 73.0PF/METER.

  8544 20 00 · GB 2018 · GBBTI503923662