3917 31 00 Böjliga slangar och rör med ett minsta bristningstryck av 27,6 MPa

Import till EU

Tullsats (tredjeland)

6,5 % Ett Taric-nummer har avvikande sats vid särskild användning.

EUDR

Omfattas inte

Taric-nummer (10 siffror)

4

Källor: Tullverket (Tulltaxan), EUR-Lex · cn2026. Ursprungsland, förmånstull och nästa steg ›

Varor som har klassificerats här

Exempel ur EU:s databas över bindande klassificeringsbesked (BKB/BTI). Beskeden gäller bara för sin innehavare och många har löpt ut — se dem som vägledning, inte som beslut för din vara.

• Laboratorieutrustning i form av pipetter som utgörs av tunna, böjliga, ihåliga rör med en längd av 9 cm och en diameter av 600 µm. Pipetterna är enligt uppgift avsedda att användas för medicinskt bruk vid handhavande av spermier och ägg i samband med provrörsbefruktning. Pipetterna består av plast och är sterilt förpackade för engångsbruk om 10 stycken pipetter i ett provrör försett med…

  3917 31 00 · SE 2019 · SEBTITV-2018-11569

• 3/8" BORE PLASTIC HOSES WITH FITTINGS. THE HOSE MATERIAL IS MAINLY COMPOSED OF NYLON, THIS HAS AN OUTER SHEATH OF POLYURETHANE EXTRUDED OVER THE HOSE. THE HOSES ARE REINFORCED WITH A STEEL WIRE. THE HOSES ARE FLEXIBLE WITH A WORKING PRESSURE OF 500 PSI (34.47 MPA). THE HOSES ARE TERMINATED AT EACH END TO TUBES WITHIN AN OUTBOARD STABPLATE THAT CAN BE ATTACHED TO BETWEEN 2 AND 13 HOSES. THE…

  3917 31 00 · GB 2020 · GBBTI504772747

• Tubing of plastic Medical grade Flexible and of high density polyethylene Cut into lenghts of various dimensions having a minimum burst pressure of 27,6 MPa

  3917 31 00 · IE 2020 · IEBTI20NT-14-8916-DEC

• The Product is a clear EVA (Ethyl Vinyl Acetate) tube 68mm in length, wiht an inner diameter of 10.5mm and an outer diameter of 12mm. The tubing has a burst pressure less than 27.6MPa. Product is used as part of an unit for solution flow of dialysis products

  3917 31 00 · IE 2020 · IEBTI19NT-14-8727-DEC

• DISPENSERS:- PLASTIC TUBING MADE ENTIRELY FROM POLETHYLENE. THE TUBING IS FLEXIBLE, HOLLOW AND IMPORTED IN VARYING LENGTHS, WITHOUT FITTINGS.

  3917 31 00 · IE 2017 · IE17NT-14-5196-02

• FLEXIBLE CONVOLUTED PLASTIC (PTFE) HOSE ASSEMBLIES. . NOT REINFORCED. THE COVER IS MADE OF STAINLESS STEEL WIRE BRAID. THESE ARE HOSES USED FOR THE TRANSFER OF FLUIDS IN THE SAME CHEMICAL AND PHARMACEUTICAL APPLICATIONS. THE HOSES ARE LINED WITH PTFE AND USUALLY SURROUNDED BY A STAINLESS STEEL WIRE OR A POLYPROPYLENE BRAID TO PROVIDE PRESSURE RETAINING CHARACTERISTICS. THE HOSES CAN BE FITTED…

  3917 31 00 · GB 2017 · GB503560087

• EXTRUSION NYLON, OBTURATOR SHAFT - THIS IS A RAW MATERIAL WHICH IS USED IN THE MANUFACTURING OF VESSEL CLOSURE MEDICAL DEVICES. THIS MATERIAL FORMS PART OF THE FINISHED GOOD. THE NYLON TUBING IS ONE OF THE MATERIALS WHICH FORMS PART OF THE OBTURATOR SHAFT, THE SHAFT IS PART OF THE MECHANISM FOR DEPLOYING THE CLIP INTO THE BODY. THE MATERIAL COMPOSITION OF THE TUBING IS NYLON 12.

  3917 31 00 · IE 2015 · IE15NT-14-2856-01

• PEBAX TUBING: SEAMLESS FLEXIBLE TUBING MADE FROM POLYETHER BLOCK AMIDE POLYMER (PEBAX). HAVING A MINIMUM BURST PRESSURE OF 27.6MPa. THIS PRODUCT IS USED IN THE MANUFACTURE OF A MEDICAL DEVICE (STENT). IT IS PART OF A FINISHED PRODUCT.

  3917 31 00 · IE 2015 · IE15NT-14-2829-01