CN code 3917 31 00 Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6 MPa

One TARIC code carries a different end-use rate.

TARIC codes (10 digits): 4

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• 3/8" BORE PLASTIC HOSES WITH FITTINGS. THE HOSE MATERIAL IS MAINLY COMPOSED OF NYLON, THIS HAS AN OUTER SHEATH OF POLYURETHANE EXTRUDED OVER THE HOSE. THE HOSES ARE REINFORCED WITH A STEEL WIRE. THE HOSES ARE FLEXIBLE WITH A WORKING PRESSURE OF 500 PSI (34.47 MPA). THE HOSES ARE TERMINATED AT EACH END TO TUBES WITHIN AN OUTBOARD STABPLATE THAT CAN BE ATTACHED TO BETWEEN 2 AND 13 HOSES. THE…

  3917 31 00 · GB 2020 · GBBTI504772747

• Tubing of plastic Medical grade Flexible and of high density polyethylene Cut into lenghts of various dimensions having a minimum burst pressure of 27,6 MPa

  3917 31 00 · IE 2020 · IEBTI20NT-14-8916-DEC

• The Product is a clear EVA (Ethyl Vinyl Acetate) tube 68mm in length, wiht an inner diameter of 10.5mm and an outer diameter of 12mm. The tubing has a burst pressure less than 27.6MPa. Product is used as part of an unit for solution flow of dialysis products

  3917 31 00 · IE 2020 · IEBTI19NT-14-8727-DEC

• DISPENSERS:- PLASTIC TUBING MADE ENTIRELY FROM POLETHYLENE. THE TUBING IS FLEXIBLE, HOLLOW AND IMPORTED IN VARYING LENGTHS, WITHOUT FITTINGS.

  3917 31 00 · IE 2017 · IE17NT-14-5196-02

• FLEXIBLE CONVOLUTED PLASTIC (PTFE) HOSE ASSEMBLIES. . NOT REINFORCED. THE COVER IS MADE OF STAINLESS STEEL WIRE BRAID. THESE ARE HOSES USED FOR THE TRANSFER OF FLUIDS IN THE SAME CHEMICAL AND PHARMACEUTICAL APPLICATIONS. THE HOSES ARE LINED WITH PTFE AND USUALLY SURROUNDED BY A STAINLESS STEEL WIRE OR A POLYPROPYLENE BRAID TO PROVIDE PRESSURE RETAINING CHARACTERISTICS. THE HOSES CAN BE FITTED…

  3917 31 00 · GB 2017 · GB503560087

• EXTRUSION NYLON, OBTURATOR SHAFT - THIS IS A RAW MATERIAL WHICH IS USED IN THE MANUFACTURING OF VESSEL CLOSURE MEDICAL DEVICES. THIS MATERIAL FORMS PART OF THE FINISHED GOOD. THE NYLON TUBING IS ONE OF THE MATERIALS WHICH FORMS PART OF THE OBTURATOR SHAFT, THE SHAFT IS PART OF THE MECHANISM FOR DEPLOYING THE CLIP INTO THE BODY. THE MATERIAL COMPOSITION OF THE TUBING IS NYLON 12.

  3917 31 00 · IE 2015 · IE15NT-14-2856-01

• PEBAX TUBING: SEAMLESS FLEXIBLE TUBING MADE FROM POLYETHER BLOCK AMIDE POLYMER (PEBAX). HAVING A MINIMUM BURST PRESSURE OF 27.6MPa. THIS PRODUCT IS USED IN THE MANUFACTURE OF A MEDICAL DEVICE (STENT). IT IS PART OF A FINISHED PRODUCT.

  3917 31 00 · IE 2015 · IE15NT-14-2829-01

• TUBING OF PLASTIC, OF HIGH DENSITY POLYETHYLENE, FLEXIBLE, OF MEDICAL GRADE, CUT INTO LENGTHS OF VARIOUS DIMENSIONS, HAVING A MINIMUM BURST PRESSURE OF THE NUMBER 27 AND 6MPA.

  3917 31 00 · IE 2013 · IE13NT-14-1545