CN code 3921 90 55 Other

TARIC codes (10 digits): 5

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• EPOXY RESIN IMPREGNATED AND COATED FIBRE GLASS FABRIC CLOTH. CONTAINS SMALL AMOUNTS OF DIMETHYLACETAMIDE AND ACETONE. ON A ROLL OF 26 METRES AND ONE METRE WIDE. WEIGHT IS 0.45 KGS PER SQUARE METRE. QUITE STIFF BUT CAN BE BENT.

  3921 90 55 · GB 2020 · GBBTI504796923

• A GLASS CLOTH PRE-IMPREGNATED WITH EPOXY RESIN (50%). THE PLASTIC SHEET IS REINFORCED BY THE GLASS FABRIC. FABRIC AND RESIN COLOURED WHITE. FABRIC PROTECTED BY EMBOSSED POLYETHYLENE FILM ON BOTH SIDES. FABRIC SUPPLIED IN ROLLS.

  3921 90 55 · GB 2019 · GBBTI504216980

• A CARBON CLOTH PRE-IMPREGNATED WITH EPOXY RESIN. THE PREPREG IS BETWEEN 2 INTERLEAVES OF GREEN EMBOSSED AND BLUE EMBOSSED POLYETHYLENE. ROLLED ONTO A CARDBOARD TUBE IN 25 OR 50 M LENGTHS.

  3921 90 55 · GB 2019 · GBBTI504216588

• HEXPLY CARBON FIBRE PRE-IMPREGNATED COMPOSITE MATERIAL. THIS IS A WOVEN CARBON FABRIC PRE-IMPREGNATED WITH EPOXY RESIN. THE FABRIC IS BETWEEN GREEN EMBOSSED AND PLAIN BLUE PLASTIC RELEASE SHEETS WHICH OVERLAP THE FABRIC BY AT LEAST 13MM. THE PRODUCT IS USED IN THE MANUFACTURE OF COMPOSITE PANELS, COMPONENTS AND STRUCTURES

  3921 90 55 · GB 2019 · GBBTI504216882

• RESIN INPREGNATED CARBON/ POLYESTER FABRIC WITH PLASTIC BACKING. MATERIALS ARE USED AS A SURFACE PRE-TREATMENT OF COMPOSITE PARTS PRIOR TO STRUCTURAL BONDING. THE SURFACE PREPARATION IS OBTAINED BY PEELING OFF THE PEEL PLY WITHOUT ANY SUBSEQUENT OPERATION OF ABRASION.

  3921 90 55 · GB 2019 · GBBTI504216686

• BRONZE FABRIC PRE-IMPREGNATED WITH EPOXY RESIN. THE PREPREG IS IS PROTECTED WITH A YELLOW PLASTIC SEPARATOR ON ONE SIDE AND A WHITE SILICON PAPER ON THE OTHER SIDE. THE PRODUCT IS PACKAGED IN A HERMETICALLY SEALED ROLL WHOSE WIDTH IS 1200MM +/- 10MM, LENGTH 40M +/- 5M. MAX WEIGHT 50KG,

  3921 90 55 · GB 2019 · GBBTI504203308

• GLASS FABRIC PRE-IMPREGNATED WITH EPOXY RESIN. THE PREPREG IS SEPARATED BY 2 POLYTHENE SHEETS, ONE GREEN AND SMOOTH, THE OTHE GREY AND EMBOSSED. THE PRODUCT IS PACKAGED IN A SEALED ROLL WHOSE WIDTH IS 1240MM +/- 10MM, LENGTH 60M +/- 10M. MAX WEIGHT 50KG,

  3921 90 55 · GB 2019 · GBBTI504203504

• GLASS CLOTH PRE-IMPREGNATED WITH EPOXY RESIN. THE PREPREG SHEET IS BETWEEN 2 BLUE EMBOSSED POLYTHENE SHEETS. THE SHEET IS ROLLED ONTO A CARDBOARD TUBE IN 25M OR 50 M LENGTHS.

  3921 90 55 · GB 2019 · GBBTI504204011