HS subheading 5911 90 Other

Origin, preferential duty and next steps ›

• 5911 90 10 Of felt
• 5911 90 91 Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
• 5911 90 99 Other

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Filter cartridges for processing fluids made of plastic materials. The filtration media is made of spunbond polypropylene (PP) microfibers which can be pleated or spiral wound. Other elements (core, outer guard, end caps) are made of polypropylene by extrusion process. Gaskets or O-rings used as seals are made of plastic or rubber. Polypropylene membrane filters are used in…

  5911 90 99 · IE 2025 · IEBTIIENEN004-2025-BTI129

• A membrane/vent filter Membrane is placed over an air vent in the back of the asset tracker, this then resists the penetration of low surface tension contaminates such as cleaning agents, detergents, and oils. EPTFE membrane treated with an oleophobic coating. A membrane filter media and a polyester scrim are laminated together. This process will produce a large 14” wide master roll. The…

  5911 90 99 · IE 2023 · IEBTIIENEN004-2023-BTI497

• PACK OF 5 HYGIENE SEAL DUST BAGS FOR WET AND DRY VACUUM CLEANER. MADE FROM CLOTH, THESE DUST BAGS HAVE A LONGER LIFE THAN STANDARD FILTRATION BAGS AND COME WITH A CLOSURE FLAP FOR SEALING IN THE DUST. PROVIDES GREATER PROTECTION FOR ASTHMA AND ALLERGY SUFFERERS

  5911 90 99 · GB 2020 · GBBTI504726363

• HIGH STRENGTH GEOTEXTILE MADE FROM 100 PERCENT HIGH TENACITY POLYESTER. MANUFACTURED USING THE WEFT INSERTION PROCESS. THE LOAD BEARING YARNS ARE LAID ACROSS ONE ANOTHER AND THEN STITCH BONDED. FOR TECHNICAL USE IN THE REINFORCEMENT OF SOIL IN THE CONSTRUCTION OF STRUCTURES SUCH AS EMBANKMENTS.

  5911 90 99 · GB 2020 · GBBTI504566259

• A MULTI LAYER NON-WOVEN BASE MADE FROM POLYESTER VICOSE FIBRES, WHICH IS SPRAYED WITH ACTIVATED CARBON (THE CARBON COATS THE FABRIC AS A SURFACE TREATMENT) AND LAMINATED TO A WHITE NON-WOVEN (HIGH DENSITY POLYETHYLENE) ON ONE SIDE. THE FUNCTION OF THE WHITE NON-WOVEN IS TO REINFORCETHE MULTI LAYER NON-WOVEN BASE. .WEIGHT OF THE MULTILAYER IS 600 GMS AND THICKNESS IS BETWEEN 2 AND 3MM. THE WEIGHT…

  5911 90 99 · GB 2019 · GBBTI504340589

• A NON-WOVEN MADE OF 100% POLYESTER. WHICH IS LAMINATED ON BOTH SIDES TO A RETICULATED POLYURETHANE FOAM SPRAYED ON BOTH SIDES WITH ACTIVATED CARBON. THE FOAM LAYER IS VISIBLE IN CROSS-SECTION. THE FOAM IS 2-3MM THICK. THE GREY NON-WOVEN IS 0.20MM THICK AND WEIGHS 34GSM. ROLLED ON A CORE APPROX 203MM X 30M. THE PRODUCT IS USED IN ODOUR ABSORBING PADS WITH THE FUNCTION OF THE CARBON TO ABSORB THE…

  5911 90 99 · GB 2019 · GBBTI504341194

• A MEDICAL OSTOMY FILTER WHICH CONSISTS OF A POLYESTER VISCOSE NONWOVEN IMPREGNATED WITH A CARBON MIX. THIS IS THEN CUT INTO SIX LENGTHS WHICH ARE ALL LAMINATED TOGETHER USING A POWDER EVA GLUE.THEN LAMINATED TO ONE LAYER OF A SPUNBOND POLYETHYLENE MATERIAL ON ONE SIDE. THE LAMINATED MATERIAL IS THEN SLIT TO 19MM WIDE STRIPS AND REELED ONTO A CARDBOARD CORE TO 50M LENGTHS. THE REELS ARE PACKED IN…

  5911 90 99 · GB 2017 · GBBTI503705576

• A MEDICAL OSTOMY FILTER OF DRYLAID NONWOVEN MECHANICALLY/THERALLY BONDED VISCOSE, RAYON, POLYESTER AND POLYETHYLENE/POLYESTER BICOMPONENT FIBRES. THEY ARE CUT INTO 90MM AND 10MM DISCS AND PACKED INTO A BOX OF 10,000.

  5911 90 99 · GB 2017 · GB503627861