CN code 7108 13 10 Bars, rods, wire and sections; plates; sheets and strips of a thickness…

TARIC codes (10 digits): 1

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Tin Gold Wire For medical devices 80% GOLD, 20% TIN

  7108 13 10 · IE 2020 · IEBTI20NT-14-9038-DEC

• The semi-manufactured gold pellets are used as an input material for use in high vacuum deposition processes. The process deposits a thin layer on of gold on the substrate surfaces.

  7108 13 10 · IE 2020 · IEBTI20NT-14-8910-DEC

• TIN GOLD WIRE (80% GOLD, 20% TIN) FOR MEDICAL APPLICATION. 0.4MM (0.015") DIAMETER WIDE

  7108 13 10 · IE 2017 · IE16NT-14-4776

• TIN GOLD WIRE (80% GOLD, 20% TIN) FOR MEDICAL APPLICATION 0.4MM (0.015") DIAMETER WIDE

  7108 13 10 · IE 2010 · IE10NT-14-762

• GOLD BULLION BARS WEIGHING 2.5G, 5G, 10G, 20G, 50G, 100G, 250G, 500G, 1OZ, 10OZ, 100OZ AND 1 KILO WITH A CONTENT OF AT LEAST 99.90% PURE GOLD.

  7108 13 10 · IE 2010 · IE10NT-14-412-1

• THE SPUTERING TARGETS ARE PURE GOLD (99.99 PURITY) AND ARE SOLD IN A VARIETY OF SIZES, RECTANGULAR, SQUARE OR ROUND SHAPES AND IN A VARIETY OF THICKNESSES. THE MATERIAL IS ANALYZED USING A GLOW DISCHARGE MASS SPECTROMETRY(GDMS). THE TARGETS ARE MANUFACTURED USING THE FOLLOWING STEPS: THE MATERIAL IS MELTED , CAST , ROLLED AND MACHINED TO CUSTOMER SPECIFICATIONS.DEPENDING ON THE CUSTOMER AND THE…

  7108 13 10 · IE 2009 · IE09NT-14-588-02

• SEMI-MANUFACTURED GOLD SPUTTERING TARGET FOR USE IN HIGH VACUUM DEPOSITION PROCESS. THE PROCESS IS DESIGNED TO PUT DOWN A LAYER OF GOLD ON A SUBSTRATE SURFACE.

  7108 13 10 · GB 2009 · GB118082093

• SEMI-MANUFACTURED GOLD PELLETS FOR USE IN HIGH VACUUM DEPOSITION PROCESS. THE PROCESS IS DESIGNED TO PUT DOWN A LAYER OF GOLD ON A SUBSTRATE SURFACE.

  7108 13 10 · GB 2009 · GB118081586