HS subheading 7306 30 Other, welded, of circular cross-section, of iron or non-alloy steel

Origin, preferential duty and next steps ›

• 7306 30 12 Cold-drawn or cold-rolled (cold-reduced)
• 7306 30 18 Other
• 7306 30 41 Plated or coated with zinc
• 7306 30 49 Other
• 7306 30 72 Plated or coated with zinc
• 7306 30 77 Other
• 7306 30 80 Exceeding 168,3 mm but not exceeding 406,4 mm

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• PRECISION TUBES, NOT FURTHER WORKED THAN CALIBRATED, DECLARED BY THE APPLICANT AS MEETING THE REQUIREMENTS OF ISO STANDARD 3306 WITH A WALL THICKNESS NOT EXCEEDING 2MM. THE TUBES ARE 3.75 METRE HOLLOW TUBE/PIPE OF CARBON STEEL. THE PRODUCT IS COLD ROLLED, WELDED WITH SEAM AND WITHOUT INSULATION. THE TUBE/PIPE HAS CIRCULAR CROSS-SECTIONS AND IS USED AS A SLEEVE TO ROUTE AND PROTECT ELECTRICAL…

  7306 30 11 · IE 2020 · IEBTI19NT-14-8700

• THE PRODUCT IS A NON-ALLOYED STEEL TUBULAR PRODUCT, PRODUCED FROM NON-ALLOY STEEL WITH MAX CHEMICAL COMPOSITION C 0.25%, MN 1.60%, P 0.55%, S 0.05%, SI 0.55%, THE PRODUCT IS LONGITUDINALLY WELDED, NON-GALVANIZED, WITH A CIRCULAR CROSS-SECTION THAT REMAINS THE SAME THROUGHOUT ITS LENGTH. WITH OUTER DIAMETER OF EXCEEDING 168,3 MM BUT NOT EXCEEDING 406.4MM, MAXIMUM LENGTH 20M.

  7306 30 80 · GB 2018 · GBBTI504055193

• GALVANISED STEEL HANDRAIL POLE. CONFORMS TO THE STANDARD EN10255:2004. FOR USE IN THE ERECTION OF SAFETY RAIL STRUCTURES. THE POLES ARE LONGITUDINALLY WELDED ERW (ELECTRIC RESISTANCE WELDED) TUBES. THE OUTER DIAMETER AND WALL THICKNESS OF THE POLES IS GIVEN AS 26.9MM: 2.6MM, 33.7MM: 3.2MM, 42.4MM: 3.2MM, 48.3MM: 3.2MM AND 60.3MM: 3.6MM. THE POLES ARE PACKED IN HEXAGONAL BUNDLES AND ARE SUPPLED…

  7306 30 72 · GB 2016 · GB502879047

• CIRCULAR STEEL TUBES. OF WELDED NOT SEAMLESS CONSTRUCTION. MADE OF NON-ALLOY STEEL. WITH A WALL THICKNESS OF 7.75 MM. OF DIAMETER 203 OR 273 OR 325 MM. HAS NO EXTERNAL OR INTERNAL FEATURES SUCH AS THREADS OR FITTINGS. USED AS RAW MATERIAL FOR THE MANUFACTURE OF PULLEYS/DRUMS FOR CONVEYORS, FOR THE QUARRYING/RECYCLING/MATERIALS HANDLING INDUSTRIES.

  7306 30 80 · GB 2015 · GB502390385

• 25MM X 3.75 M ELECTRICAL CONDUIT PRECISION TUBES. THE TUBES ARE ROLLED, FORMED, SCREWED AT EACH END AND ARE HOT TIPPED GALVANIZED. WITH A WALL THICKNESS OF 1.6MM

  7306 30 11 · GB 2009 · GB118786242

• 20MM X 3.75 M ELECTRICAL CONDUIT PRECISION TUBES. THE TUBES ARE ROLLED, FORMED, SCREWED AT EACH END AND ARE HOT TIPPED GALVANIZED.

  7306 30 11 · GB 2009 · GB118738844

• A MILD STEEL THREADED WELDED TUBE (GAS PIPE). NOT COATED WITH ZINC. NON PRECISION TUBE. THE TUBE MEASURES 21.3 MM IN DIAMETER BY 51 MM IN LENGTH. MALE TAPER PIPE THREADS AT EACH END. FOR GENERAL USE WHERE SHORT PEICES OF TUBE ARE NEEDED TO CONNECT VALVES AND PIPE FITTINGS. TRADENAME: BARRELL NIPPLE 1/2 INCH OR 15MM NOMINAL BORE.

  7306 30 49 · GB 2009 · GB118741959

• PRECISION WELDED, ROUND STEEL TUBES MANUFACTURED TO BRITISH STANDARDS BS4568-2: 1970 (NOW BS EN 61386 - 1: 2008). THE TUBES HAVE A WALL THICKNESS OF 1.6MM AND A DIAMETER OF 25MM. THE TUBE LENGTH IS 3000MM. THE SURFACE FINISH IS HOT DIP GALVANISED. THE TUBES ARE SCREWED AT BOTH ENDS WITH A SOCKET APPLIED TO ONE END ONLY. THE TUBES ARE USED FOR ELECTRICAL INSTALLATIONS ONLY TO PROTECT ELECTRICAL…

  7306 30 11 · GB 2009 · GB118736556