CN code 7308 90 98 Other
CN code 7308 90 98 covers other (Other).
- Third-country duty
- 0 % (fri)
- EUDR
- Not in scope
- Level
- CN code
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.
Importing into the EU
TARIC codes (10 digits): 3
Goods that have been classified here
Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.
A high Tensile Steel Y Shaped Fencing Post The product is used for agricultural fencing. It is driven 2 ft into the ground and wire fence netting is then attached to the Y shaped fencing post 1.8m long hot dipped galvanised steel Y shaped post 11 spring loaded clips at various hights High Tensile galvanised steel 2.5m wall thickness Manufactured from high tensile steel coil, that is then rolled…
Mesh panel. This Mesh 200 x 50 Panel construction features galvanised steel horizontal and vertical rods 5mm in diameter, resistance welded at the intersection points to form a 200mm x 50mm mesh pattern. Paramesh 3M mesh fencing is easy to transport, simple to erect and can be easily stored, even in large volumes, which makes it ideal as a stock product for fencing erectors. The 3M range is…
Bathroom pod manufactured to client specification to include finished product including sanitary ware and tiles. Shrink wrapped before shipping . The bathroom pod is fully assembled before shipment. It is sealed with shrink wrapped ready for shipping. 2. The frame is made of 1.2mm Galvanised from rolled steel with a 12.5mm moisture resistant plywood board to make the outer frame
1. Bathroom Pod 2. Manufactured to Client specification for Apartments and hotels, Shipped complete to include fixed sanitary ware & tiles. The bathroom pod is fully assembled before shipment. It is sealed with shrinkwrap ready for shipping. 2. The frame is made of 1.2mm Galvanised from rolled steel with a 12.5mm moisture resistant plywood board to make the outer frame.
The products are round small metal tubular sockets of steel and stainless steel. The products are designed for the safe lifting and transportation of various types of precast (concrete) elements. The products are used to lift or fix large precast (concrete) elements. For example, a large concrete panel may be a part of a bridge structure. These elements would allow the that structure to be…
THIS IS A STEEL OVERBOARDING CHUTE STRUCTURE MANUFACTURED AS A ONE PIECE UNIT. WITH A 90 DEGREE WRAP ANGLE IT IS PLACED ON THE SIDE OF A SUBSEA7 SHIP AND IS USED TO GUIDE EITHER A WINCH WIRE, FLEXIBLE CABLES, HOSES, UMBILICALS OR PIPELINE OVER THE SIDE OF THE SHIP FOR LAYING ON THE SEABED. WITH SAFE WORKING LOAD OF 3 TONNE, BEND RADIUS OF 2 METRES, THROAT WIDTH OF 285 MM OF STEEL PLATE.…
THESE ARE FENCE ELEMENTS CONSISTING OF STEEL POSTS AND GALVANISED AND POWDER-COATED STEEL WIRES, CONNECTED HORIZONTALLY AND VERTICALLY WITH A MESH SIZE OF 200 X 25MM AND 12.7 X 76.2MM. THE PRODUCTS ARE INTENDED TO BE PERMANENTLY ATTACHED TO THE GROUND TOGETHER WITH POSTS.
STEEL PALISADE SECURITY FENCE SYSTEMS. IT IS MADE OF ROLLED STEEL PALES, ANGLED TOP AND BOTTOM CONNECTING RAILS, ROLLED STEEL JOISTS POSTS, GATES AND BRACKETS. IT CAN BE ZINC COATED WITH A COLOUR TOP COAT IF REQUIRED.
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.