CN code 8105 90 00 Other

TARIC codes (10 digits): 1

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Cobalt Chrome Testing Materials in circular form machined from bar stock used for Tensile testing thermal spray coatings. Composition 57.66% to 68.5% Cobalt.

  8105 90 00 · IE 2025 · IEBTIIENEN004-2025-BTI188

• COBALT TUBING- THIS TUBING IS USED IN THE MANUFACTURING OF STENT IMPLANTS. THE TUBING COMPOSITION IS A MIXTURE OF CHROMIUM, IRON, MANGANESE, NICKEL, TUNGSTEN, SILICON, SULPHUR, PHOSPHORUS, CARBON AND COBALT. THE MAJORITY OF THE COMPOSITION BEING COBALT. THE STENT IMPLANTS ARE A COMPONENT OF THE FINISHED STENT MEDICAL DEVICE AND IS IMPLANTABLE.

  8105 90 00 · IE 2019 · IEBTI19NT-14-8532-02

• COBALT CHROME TESTING MATERIALS IN CIRCULAR FORM MACHINED FROM BAR STOCK USED FOR TENSILE TESTING THERMAL SPRAY COATINGS. COMPOSITION 57.66% TO 68.5% COBALT.

  8105 90 00 · IE 2016 · IE16NT-14-4253-04

• COBALT CHROME DENTAL ALLOY IN THE FORM OF AN INGOT. COMPOSITION: 62.5% COBALT, 28.5% CHROMIUM, 6.0% MOLYBDENUM AND LESS THAN 1% SILICON, IRON, MANGANESE AND NICKLE. PHYSICAL PROPERTIES: CASTING TEMPERATURE: 2700 DEGREES F (1482 DEGREES C). PROOF STRESS: 600 MPa. ELONGATION: 6%. THE PRODUCT IS USED TO MAKE METAL DENTURES IN THE DENTAL INDUSTRY.

  8105 90 00 · GB 2015 · GB502747070

• 50% COBALT BASED SUPER ALLOY USED IN THE MANUFACTURE OF GAS TURBINE PARTS. IMPORTED IN THE FORM OF A BAR. CONTAINS CHROMIUM AND TUNGSTEN.

  8105 90 00 · GB 2015 · GB502255195

• COBALT TUBING USED IN THE MANUFACTURING OF STENTS (MEDICAL DEVICES).

  8105 90 00 · IE 2013 · IE13NT-14-1584

• COBALT CHROMIUM ALLOY TUBING WHICH IS USED IN THE PRODUCTION OF MEDICAL DEVICE COMPONENTS AND SUB ASSEMBLIES. THE COBALT PREDOMINATES BY WEIGHT.

  8105 90 00 · IE 2012 · IE12NT-14-730-01

• BARE (AS IN NO FLUX) HARDFACING WELDING RODS. MADE OF AN ALLOY WHERE COBALT PREDOMINATES BY WEIGHT (TYPICALLY COBALT 60%, TUNGSTEN 10%, CHROMIUM 30%). MADE BY A CONTINUOUS CASTING METHOD, TO STRICT REQUIREMENTS AND ARE IMPORTED IN INTENDED LENGTHS. IN USE THE ROD IS HEATED AND MELTED BY A WELDING TORCH, AND DEPOSITED ONTO A COMPONENT. THIS IS TO IMPROVE THE PROPERTIES OF WEAR, STRENGTH…

  8105 90 00 · GB 2012 · GB122331915