CN code 8307 10 00 Of iron or steel

One TARIC code carries a different end-use rate.

TARIC codes (10 digits): 2

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• A 1000MM X ½" BSP TM, ½" BORE IN A YELLOW COLOUR. IT IS SUITABLE FOR USE WITH ALL 3 GAS FAMILY TYPES. THE PRODUCT IS A STAINLESS STEEL 316L CORRUGATED, BRAIDED HOSE WITH A PVC COVERING. IT HAS A STAINLESS-STEEL BAYONET END WITH A SWIVEL METAL ELBOW AND A METAL KNURLED LOCKING COLLAR WHICH IS COMPATIBLE WITH BS 669-1 DESIGN AND EN 15069 APPROVED SOCKETS. ALL METAL CONNECTING ENDS ENABLE THE HOSE…

  8307 10 00 · GB 2020 · GBBTI504649645

• A FLEXIBLE HOSE, FOR SHOWERING PURPOSES. OUTER IS OF STAINLESS STEEL (SUS304) WITH A PVC INNER LINER. THE HOSE IS COMPLETE WITH END FITTINGS, WHICH ARE MADE OF STAINLESS STEEL AND BRASS. THE HOSES ARE 1.25 AND 1.75 METRES IN LENGTH.

  8307 10 00 · GB 2018 · GBBTI504048580

• FLEXIBLE STRIPWOUND HOSE MADE FROM STAINLESS STEEL T304. IT IS ALSO KNOWN AS POLYLOCK. IT IS TYPICALLY USED IN EXHAUST MANUFACTURE AND REPAIR FOR THE TRANSPORT OF DRY GOODS SUCH AS GRAIN. THE PRODUCT ACCEPTS AXIAL AND BENDING MOVEMENT WHICH MEANS IT CAN BE USED AS AN ALTERNATIVE TO A FIXED BEND IN PIPE APPLICATIONS. IT IS MADE IN VARIOUS LENGTHS AND IS GENERALLY WOUND UP AND PACKAGED INTO CRATES…

  8307 10 00 · GB 2017 · GB503460484

• 782.72 FLEXIBLE STAINLESS STEEL EXHAUST FLUE PIPE. 22 MM DIAMETER. WALL THICKNESS 1.8 MM. USED TO DIRECT THE EXHAUST GASES FROM A GAS SPACE HEATER IN A CERTAIN DIRECTION. CONTINUOUS TEMPERATURE RESISTANCE AT LEAST 350 DEGREES CENTIGRADE.

  8307 10 00 · GB 2014 · GB501948847

• A FLEXIBLE TUBE OF STEEL WHICH IS A COMPONENT OF AN ATTACHMENT CALLED A FLEX-ARM. THE FLEX ARM IS BUILT TO FIT THE TOP OF A TROLLEY THAT IS SUPPLIED FOR A VENTILATOR UNIT FOR USE ON HOSPITAL WARDS.

  8307 10 00 · IE 2014 · IE13NT-14-1778

• SINGLE METAL SHOWER HOSE. THE TUBE IS MADE FROM METAL. THE NUT IS MADE FROM PLASTIC. IT IS 1.5M LONG. IT HAS A CHROME FINISH.

  8307 10 00 · GB 2013 · GB501475085

• OUTER SHAFT - THIS IS A FLEXIBLE TUBE MADE OF METAL AND PLASTIC. IT IS USED IN THE MANUFACTURE OF MEDICAL DEVICE.

  8307 10 00 · IE 2013 · IE12NT-14-963-03

• CASING. PRODUCT COMPRISES OF A FLEXIBLE STEEL TUBE WHICH IS USED TO PROVIDE PROTECTION AND SUPPORT FOR MECHANICAL HIGH TENSILE STEEL CORE. THE PRODUCT IS FABRICATED, BY ROLLING A LENGTH OF ROLLED FLAT STEEL BAR INTO A SPIRAL, WHICH IS THEN WRAPPED IN AN OIL RESISTANT RUBBER IMPREGNATED FABRIC LAYER. THIS IS THEN COVERED IN A STEEL WIRE BRAID WHICH IS IN TURN, COVERED IN A POLYESTER COVERING.…

  8307 10 00 · GB 2011 · GB121223238