CN code 8412 29 89 Other

One TARIC code carries a different end-use rate.

TARIC codes (10 digits): 2

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• A HYDRAULIC POWER PACK HAS BEEN DESIGNED TO BE USED WITH A 10T TENSIONER ( NOT INCLUDED WITHIN THIS BTI). THE POWER PACK IS CONTAINERISED WITHIN AN OUTER SHELL OF DUCTILE CAST IRON. CONTAINED WITHIN THE UNIT IS A SINGLE ELECTRIC MOTOR AND PUMP SET, OVERHEAD RESERVOIR, ELECTRIC MOTOR STARTER PANEL AND A HPU CONTROL PANEL. THE SINGLE ELECTRIC MOTOR DRIVES THE THREE PUMPS FROM A COMMON SHAFT. THE…

  8412 29 89 · GB 2020 · GBBTI504847935

• HYDRAULIC ACTUATOR FOR FITTING TO A VALVE. OPENS AND SHUTS THE VALVE BY THE MEANS OF HYDRAULIC ACTION. AVAILABLE WITH SYMMETRIC AND CANTED YOKES. FOR USE IN A WIDE RANGE OF INDUSTRIES INCLUDING OIL AND GAS, CHEMICAL, REFINING, PULP AND PAPER, WATER AND WASTE WATER, POWER GENERATION AND NUCLEAR. OF STEEL. IMPORTED FROM CHINA AND USA.

  8412 29 89 · GB 2011 · GB120980193

• HYDRAULIC ACTUATOR SYSTEM. A GAS/HYDRAULIC ROTARY ACTING CYLINDER FOR FITTING TO A VALVE THAT USES PRESSURISED GAS FROM THE PIPE LINE AS ITS POWER SOURCE. AUTOMATES VALVES LOCATED ON GAS TRANSMISSION PIPELINES. AVAILABLE IN ROTARY AND QUARTER TURN MODELS. OF ALUMINIUM.

  8412 29 89 · GB 2011 · GB120980879

• A HELICAL SPLINE GAS OVER OIL ACTUATOR FOR A VARIETY OF SMALL VALVE (2" TO 8") PIPELINE APPLICATIONS. IT IS AN OIL FILLED ACTUATOR THAT USES HIGH PRESSURE GAS TAKEN DIRECTLY FROM THE PIPELINE AS A PRESSURE MEDIUM. THE ACTUATOR IS USED ON ROTARY QUARTER TURN VALVES.

  8412 29 89 · GB 2011 · GB120981778

• A HYDRAULIC ROTARY VANE TYPE VALVE ACTUATOR FOR DEEP SEA APPLICATIONS IN THE OIL/GAS SECTOR. THE ACTUATOR IS IDEAL FOR DOUBLE ACTING (OPEN/CLOSE) VALVE CONTROL AND CAN ALSO BE USED WHERE A HYDRAULIC ACCUMULATOR IS USED TO PROVIDE POWER FOR THE FAIL SAFE VALVE STROKE. THE ACTUATOR IS MOUNTED CONCENTRICALLY OVER THE VALVE STEM FOR STABILITY. PROVIDES SUBSEA VALVE CONTROL AT DEPTHS UP TO 1000 METERS.

  8412 29 89 · GB 2011 · GB120982285

• A HYDRAULIC ROTARY VANE VALVE ACTUATOR, FOR OPEN/CLOSE OPERATION OF BALL, PLUG AND BUTTERFLY VALVES OR OTHER 90 DEGREE ROTATION EQUIPMENT. THE ACTUATOR IS TYPICALLY USED ON GAS OR OIL PIPELINES. IT IS TYPICALLY POWERED BY NATURAL GAS USING GAS OVER OIL TANKS BUT CAN BE POWERED HYDRAULICALLY OR BY NITROGEN STORAGE VESSELS. OPPOSITE CHAMBERS IN THE ACTUATOR ARE CONNECTED BY PRESSURE EQUALISING…

  8412 29 89 · GB 2011 · GB120982187