HS subheading 8479 90 Parts

Origin, preferential duty and next steps ›

• 8479 90 15 Parts of machines of subheading 84798970
• 8479 90 20 Of cast iron or cast steel
• 8479 90 70 Other

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Steel disc used to float finish concrete floors and make them level. Available in various sizes. Specially made to fit power trowel.

  8479 90 70 · IE 2020 · IEBTI20NT-14-9034-DEC

• FIXING KIT MADE OF IRON/STEEL FOR USE ON SHUTTER DOORS CREATING A PULL SYSTEM HELPING TO OPEN THE SHUTTER DOORS. CONTAINS BRAKING SENSOR THAT WOULD STOP THE SHUTTER FOR SAFTEY, TELESCOPIC DUMMY END, LANDING ANGLE, V BLOCK AND DRIVE END. FIXING KITS ARE AVAILABLE TO SUIT 30 AND 40 MM SHAFTS ALL OF THE PARTS CREATING ONE FULL KIT. KIT ACTS AS ADDITION PART THAT CAN BE FITTED TO THE SHUTTERS.

  8479 90 70 · GB 2019 · GBBTI504449459

• INSTRUMENT DYNAMIC CONTROLLER (IDC) TO BE USED WITH A DOWNHOLE TRACTOR IN OIL AND GAS INDUSTRIES. THE PRODUCT IS DESIGNED TO PREVENT THE ROTATION OF A TOOL STRING THAT IS BEING ORIENTATED, OR WHEN A DOWNHOLE TRACTOR IS BEING RUN IN DEVATIONS OF GREATER THAN 90 DEGREES, TO PREVENT IT FROM RUNNING BACK OVER THE CABLE WHEN THE TRACTOR IS STOPPED. DIFFERENT HI-GRIP PADS/CONFIGURATIONS ARE AVAILABLE…

  8479 90 70 · GB 2017 · GB503500210

• A POWERED SWIVEL JOINT TOOL USED IN WELLS. THE PRODUCT IS USED TO ROTATE TOOLS/GUNS BELOW TO A SPECIFIC POSITION IN THE WELLBORE. A HIGH RESOLUTION ENCODER TOGETHER WITH A LOW SIDE DETECTOR IS USED TO MONITOR THE ANGLE BETWEEN THE RELATIVE BEARING OF THE TOOL. AN OFFSET CAN BE ADDED TO THE RELATIVE BEARING IF THE GUN IS NOT ALIGNED WITH THE JOINT. IT IS PART OF A DOWNHOLE TRACTOR.

  8479 90 70 · GB 2017 · GB503500602

• GUN BRAKE SYSTEM (GBS) TO BE USED WITH A DOWNHOLE TRACTOR IN OIL AND GAS INDUSTRIES. THE GUN BRAKE SYSTEM IS DESIGNED TO PREVENT ANY MOVEMENT OF THE PERFORATING STRING DURING PERFORATING OPERATIONS. THIS PREVENTS THE GUN FROM BEING BLOWN UPHOLE DURING UNDERBALANCED PERFORATING OPERATIONS, OR PROTECTS THE WEAKPOINT WHEN LARGER, HEAVIER GUNS ARE BEING FIRED. THIS CAN PREVENT BREAKAGE AND/OR DAMAGE…

  8479 90 70 · GB 2017 · GB503500112

• A RELEASE TOOL USED IN WELLS. THE PRODUCT IS USED WHERE THE CONTROLLABLE RELEASE OF ALL OR PART OF A STUCK TOOL STRING MAY BE REQUIRED. IT CAN WITHSTAND THE HIGHER POWER REQUIREMENTS FOR DOWNHOLE TRACTORS AND IS ABLE TO CARRY A MAXIMUM SAFE LOAD OF OVER THREE TONNES.

  8479 90 70 · GB 2017 · GB503500406

• A SHOCK ABSORBER TOOL USED IN WELLS. THE ITEM IS DESIGNED TO WITHSTAND HIGH BENDING MOMENTS THROUGH ITS HEAVY DUTY COILED SPRING CONSTRUCTION AND IS UNIQUE IN THAT NOT ONLY DOES IT PROVIDE SHOCK ABSORBTION FOR FORCES BELOW BUT IT ALSO ABSORBS THE SHOCK WHEN THE TOOL STRING DROPS BACK DOWN HOLE. THIS ENSURES THAT THE WEAKPOINT IS CONSTANTLY PROTECTED AGAINST HIGH SHOCK LOADS. IT IS PART OF A…

  8479 90 70 · GB 2017 · GB503500504

• A PART DESIGNED FOR AN INDUSTRIAL MANIPULATOR. THE PRODUCT IS A THREE FINGER FRONT ADAPTER AND IS MADE OF HIGH STRENGTH STAINLESS STEEL. THE FRONT ADAPTER ASSEMBLY COMES COMPLETE WITH ACTUATION PLATE AND PISTON AND ALL THE NECESSARY GASKETS AND WILL REPLACE THE STANDARD PARALLEL GRIP BY LOOSENING THE 6 BOLTS. THE MANIPULATORS ARE USED IN THE NORTH SEA AND ELSEWHERE.

  8479 90 70 · GB 2017 · GB503445967