CN code 8482 10 90 Other

TARIC codes (10 digits): 1

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• JIS SUJ2 STEEL DOUBLE ANGULAR CONTACT BEARING EXCEEDING 30MM EXTERNAL DIAMETER WITH 2 ROWS OF BALLS INSIDE 2 INNER RINGS WITH A SEAL. WITH OR WITHOUT PULSAR.

  8482 10 90 · GB 2020 · GBBTI504556459

• A STEEL WHEEL BEARING TO BE MOULDED INTO CASTORS. FOR USE IN INDUSTRIAL CASTORS PART NO 7335875. DIAMETER GREATER THAN 30MM.

  8482 10 90 · GB 2013 · GB501423112

• BALL BEARING USED IN THE MANUFACTURING OF HAND HELD POWER TOOLS.

  8482 10 90 · IE 2012 · IE12NT-14-109

• CIRCULAR DISC SHAPED BALL BEARING CONTAINING BEARING BALLS.USED ON THE REAR WHEEL OF A MOTOCYCLE. WITH AN INNER DIAMETER OF 25MM AND OUTER DIAMETER OF 75MM. IT IS MADE FROM STEEL.

  8482 10 90 · GB 2011 · GB120352818

• A STAINLESS STEEL BALL BUSHING BEARING, ALSO KNOWN AS A MULTI TRACK BALL BUSHING. THE BUSHING IS USED TO ALLOW THE EASY MOVEMENT OF A STEEL SHAFT UP AND DOWN. (LINEAR MOTION) THE BEARINGS ARE DESIGNED WITH GREATER RIGIDITY AND PROVIDE GREATER LOAD CAPACITY THAN CONVENTIONAL LINEAR BEARINGS. THE DESIGN INCOPORATES A ONE-PIECE STEEL SLEEVE AND A SINGLE PIECE ENGINEERED BALL RETAINER TO PROVIDE…

  8482 10 90 · GB 2008 · GB117884935

• A BALL BUSHING BEARING PROVIDING GREATER LOAD CAPACITY AND TRAVEL LIFE THAN A CONVENTIONAL LINEAR BEARING. THE BEARING COMPRISES OF AN OUTER STEEL RING, BEARING PLATE, A ROLLING ELEMENT AND A LINEAR RACE SHAFT.

  8482 10 90 · GB 2008 · GB117885246

• STEEL BALL BUSHING, ALSO KNOWN AS MULTI-TRACK BALL BUSHING. ENCLOSED WITHIN A PROTECTIVE COVERING BALL BEARINGS ALLOW THE EASY MOVEMENT OF A STEEL SHAFT UP AND DOWN. THEY ARE GUIDED AND RECIRCULATED THROUGH A LOADED AND AN UNLOADED REGION TO ENABLE CONTIUOUS LINEAR MOTION ALONG THE LENGTH OF THE SHAFT. THE GREATEST EXTERNAL DIAMETER IS 62 MM.

  8482 10 90 · GB 2008 · GB117397947

• PLASTIC BALL BUSHINGS WHICH ARE AXIAL-MOTION BEARINGS, USED IN TENSILE TESTING MACHINES. ENCLOSED WITHIN A PROTECTIVE COVERING BALL BEARINGS ALLOW THE EASY MOVEMENT OF A STEEL SHAFT UP AND DOWN. THEY ARE GUIDED AND RECIRCULATED THROUGH A LOADED AND AN UNLOADED REGION TO ENABLE CONTIUOUS LINEAR MOTION ALONG THE LENGTH OF THE SHAFT. THE GREATEST EXTERNAL DIAMETER IS 62 MM.

  8482 10 90 · GB 2008 · GB117398062