CN code 8484 20 00 Mechanical seals
CN code 8484 20 00 covers mechanical seals (Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals).
- Third-country duty
- 1,7 %
- EUDR
- Not in scope
- Level
- CN code
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.
Importing into the EU
TARIC codes (10 digits): 2
Goods that have been classified here
Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.
FFKM (Perfluoro elastomer) O-rings. These are high-performance sealing components designed for extreme chemical and temperature resistance. They are a specialised type of elastomeric seal used in demanding industrial applications, particularly within mechanical seals for pumps, compressors, and other rotating equipment. They come in various standard and custom sizes, typically following AS568…
Mechanical seal faces used in various industrial applications to prevent leakage between rotating and stationary parts. These seal faces are crafted from Tungsten Carbide due to properties allowing for thermal conductivity, resistance to wear and corrosion. They are ring shaped, of a graphite colour packaged sufficiently to protect them from damage when shipping. Sizes can be from 35mm to 200mm…
THE PRODUCTS CLASSES AS CARBON GRAPHITE MECHANICAL SEAL PARTS. A MECHANICAL SEAL HAS 2 FACES, ONE THAT IS CALLED THE STATIONARY OR SEAT FACE, AND IS FITTED INTO A PUMP CASING OR HOUSING, THE OTHER IS CALLED THE ROTARY FACE, AND IS SEALED ONTO THE PUMP'S ROTATING SHAFT, TYPICALLY WITH A RUBBER SEALING PART, LIKE A MOULDED BELLOWS OR AN O-RING, AND SOME METAL PARTS TO HOLD THE ROTARY AND RUBBER…
A MECHANICAL SEAL FOR USE IN DOWN HOLE ZONAL ISOLATION IN THE GAS AND OIL INDUSTRIES. MADE FROM STEEL WITH RUBBER SEALS. IT HAS MOVING PARTS AS INTEGRAL TO THE SEAL IS A METAL PETAL BACK UP SYSTEM TO PREVENT SEAL EXTRUSION. THE SEAL IS ENERGISED USING A MOVING HYDRAULIC PISTON WHICH FURTHER MORE IS MECHANICALLY LOCKED BY USING AN INTER-CONNECTING BODY LOCK RING SYSTEM.
SIGMA SEAL. USED IN A SIMILAR WAY AS A GASKET. MADE OF INCONEL STEEL AND SILVER PLATED. FINISHED COMPONENT. USED TO PROVIDE A PHYSICAL SEAL BETWEEN TURBINE HOUSING AND BEARING HOUSINGMATING FACES. IT IS MECHANICAL.
THIS STEEL SEALING RING IS A MECHANICAL GAS TIGHT SEAL THATS FITS BETWEEN A ROTATING SHAFT AND THE SLEEVE IT IS FITTED INSIDE OF. IT FITS INTO A GROOVE THAT HAS BEEN MACHINED INTO A ROUND BAR, AND ACTS AS A SEAL WHEN THE SHAFT IS FITTED INTO A HOLE. THE SHAFT SEALING RING IS PART OF THE TURBOCHARGER ASSEMBLY DESIGNED FOR USE ON AN INTERNAL COMBUSTION ENGINE.
RING ASSEMBLIES WHICH ARE MECHANICAL SEALS USED FOR A WATER/AIR EXHAUST SYSTEM.
A RETRIEVABLE PACKER USED IN DRILL STEM TESTING. IT IS RATED TO 10,000 PSI AT 350 DEGREE F. THE PACKER HAS HARDENED METAL SLIPS WHICH DIG INTO THE CASING AND ANCHOR THE DST STRING IN A FIXED LOCATION. IT ALSO HAS A RUBBER ELEMENT TO SEAL OFF TUBING TO THE ANNULUS. THE RUBBER ELEMENTS ARE PUT UNDER MECHANICAL COMPRESSION AT A GIVEN DEPTH BY MOVEMENT OF THE TOOL BY A SPECIFIC PROCEDURE, USING A…
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.