CN code 8533 10 00 Fixed carbon resistors, composition or film types

TARIC codes (10 digits): 1

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• A HIGH POWER COAXIAL CONNECTOR FOR USE ON A TELECOMMUNICATIONS REPEATER. THE CONNECTOR CONTAINS A FIXED CARBON RESISTOR. THE PRODUCT INCLUDES COOLING FINS TO MINIMIZE THE RISE IN TEMPERATURE OF THE RESISTOR.THE POWER RATING IS 100 W. THE LENGTH IS 188MM WITH 110 X110MM CROSS SECTION. MASS IS 1780G THE IMPEDANCE IS 50 OHM WITH A FREQUENCY RANGE DC-3GHZ.THE HOUSING IS MADE FROM ANODISED ALUMINIUM.

  8533 10 00 · GB 2017 · GBBTI503675945

• A LOW POWER COAXIAL CONNECTOR FOR USE ON A TELECOMMUNICATIONS REPEATER. THE CONNECTOR CONTAINS A FIXED CARBON RESISTOR. THE PRODUCT INCLUDES COOLING FINS TO MINIMIZE THE RISE IN TEMPERATURE OF THE RESISTOR.THE POWER RATING IS 2W. THE LENGTH IS 40MM WITH 20MM CROSS SECTION. MASS IS 52G THE IMPEDANCE IS 50 OHM WITH A FREQUENCY RANGE DC-3GHZ.THE HOUSING IS MADE FROM ANODISED ALUMINIUM.

  8533 10 00 · GB 2017 · GBBTI503675847

• A TERMINATION JACK, A COAXIAL CONNECTOR FOR USE ON A TELECOMMUNICATIONS REPEATER, TO TERMINATE THE UNUSED RF PORTS THAT FEED THE FO MODULE INPUT. THE JACK CONTAINS A FIXED CARBON RESISTOR. IT HAS AN IMPEDENCE OF 50 OHM, A FREQUENCY RANGE: DC-4GHz AND RATED RF POWER: 0.5W. THE BODY END CAP AND CENTRE CONTACT ARE MADE OF GOLD PLATED BRASS AND THE OUTER CONTACT, C RING OF GOLD PLATED BERYLLIUM…

  8533 10 00 · GB 2017 · GBBTI503674654

• FIXED CARBON COMPOSTION RESISTOR.IGNITION CABLE SUPPRESSED CONDUCTOR.ARAMID FIBRE/CARBON SUPPRESSION CONDUCTOR WITH RELEASE.CARRIER THREE ENDS OF 1500 DENIER ARAMID FIBRE.GRAPHITE COATING, SIX COATS OF CARBON LOADED CONDUCTIVE GRAPHITE INDIVIDUALLY CURED. RELEASE AGENT, TWO COATS OF GRAPHITE/CARBON.FINISHED RESISTANCE, 2,500 TO 3,800 OHMS PER FOOT (8,100 TO 12,400 OHMS/METER). FINISHED DIAMETER…

  8533 10 00 · GB 2011 · GB120833993

• FIXED CARBON COMPOSTION RESISTOR.IGNITION CABLE CONDUCTOR. 350 OHM WIRE WOUND ON CARBON ARAMID/FIBREGLASS CARRIER WITH RELEASE.CARRIER TWO ENDS OF 1500 DENIER ARAMID FIBRE, ONE BUNDLE FIBERGLASS. GRAPHITE COATING, SIX COATS OF CARBON LOADED CONDUCTIVE GRAPHITE INDIVIDUALLY CURED. WINDING , .00225 INCH (.057MM) STAINLESS STEEL. ALLOY. APPROX TURNS 32 TURNS PER INCH (12.6 TURNS PER CM). GRAPHITE…

  8533 10 00 · GB 2011 · GB120833700

• FIXED CARBON COMPOSTION RESISTOR.IGNITION CABLE CONDUCTOR. 850 OHM WIRE WOUND ON CARBON LOADED ARAMID/FIBREGLASS CARRIER WITH RELEASE.CARRIER FOUR ENDS OF 1500 DENIER ARAMID FIBRE. GRAPHITE COATING, COATED WITH CARBON LOADED CONDUCTIVE GRAPHITE TO 15,000 OHMS/FT. WINDING , .00225 INCH (.057MM) STAINLESS STEEL. ALLOY 304 STAINLESS STEEL. APPROXIMATE TURNS 150 TURNS PER INCH (59 TURNS PER CM).(…

  8533 10 00 · GB 2011 · GB120834305

• RESISTOR FOR USE IN AN AUTOMATIC DATA PROCESSING MACHINE. THIS IS A FIXED CARBON RESISTOR.

  8533 10 00 · IE 2010 · IE10NT-14-896-04

• A CARBON FILM ELECTRICAL RESISTOR, RADIAL FORMED AND FLAME RETARDANT.

  8533 10 00 · GB 2005 · GB500110832