CN code 8536 90 95 Other

TARIC codes (10 digits): 1

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• A PCB SILICONE CONNECTION MAT WITH METAL CONTACT POINTS USED FOR ESTABLISHING AN ELECTRICAL CONNECTION USING PRESSURE (NO PLUGGING) IN THE ELECTRICAL CIRCUIT OF A VEHICLE’S GEAR SHIFT MODULE. FOR A VOLTAGE OF LESS THAN 1000 VOLTS

  8536 90 95 · IE 2023 · IEBTIIENEN004-2023-BTI471

• Produsul reprezinta o tastatura din cauciuc siliconic, fabricata prin injectie. Aceasta reprezinta un element de contact (contact pads) care contine pastile conductoare electric din carbon, incorporate sub fiecare tasta. Tastatura intra in componenta unui osciloscop/multimetru portabil. Suprafata plata a produsului este de culoare neagră, iar tastele sunt multicolore.

  8536 90 95 · RO 2022 · ROBTI2022/003990

• ELECTROMAGNETIC INTERFERENCE (EMI) GASKETS. IN THE FORM OF CANTED COIL CIRCULAR SPRINGS TO PROTECT ELECTRICAL CIRCUITS BY RETAINING TRANSMISSIONS IN THE DEVICE AND BY PREVENTING ELECTROMAGNETIC RADIATION.

  8536 90 95 · IE 2022 · IEBTIIENEN004-2022-BTI120

• MINI-CONTACT BATTERY CONNECTION TERMINAL FOR INCORPORATION INTO AN ALARM. FOR USE TO MAKE ELECTRICAL CONNECT. 4MM X 4.1MM X 3.58MM

  8536 90 95 · GB 2020 · GBBTI504744557

• COMPACT BATTERY TERMINALS MADE FROM STAINLESS STEEL. FOR ELECTRICAL CONDUCTING IN PROXMITY INFRARED DEVICES. DIMENSION 5x4x5MM.

  8536 90 95 · GB 2020 · GBBTI504744165

• SOLDERED IN NUT. THIS ITEM FORMS PART OF THE ELECTRICAL CIRCUIT OF A BATTERY CHARGER FOR A BATTERY POWERED VEHICLE. THE PRODUCT WHICH HAS A THREADED TOP TO RECEIVE A SCREW, IS SOLDERED ONTO A PRINTED CIRCUIT BOARD. THE CURRENT GOES THROUGH THE DEVICE AND MAKES AN ELECTRICAL CONNECTION BETWEEN THE COMPONENT AND THE BOARD. IT IS MADE FROM COPPER AND COATED IN NICKEL.

  8536 90 95 · IE 2020 · IEBTI20NT-14-2031-DEC

• POGO Pin Connector SPRING LOADED CONNECTOR PIN - IT IS USED TO CONNECT AN ELECTRONIC CONTROLLER TO A VIBRATION DEVICE. THE POGO PIN IS A PREFABRICATED ELEMENT IN AN ELECTRICAL CIRCUIT OR A CONTACT ELEMENT FOR WIRE OR CABLES. IT IS FOR A VOLTAGE OF <20 VOLTS.

  8536 90 95 · IE 2020 · IEBTI20NT-14-9032-DEC

• FUSE CLIP IN AN ELECTRICAL CIRCUIT. THIS PRODUCT FORMS PART OF AN ELECTRICAL CIRCUIT. IT IS MADE FROM BERYLLIUM COPPER WITH A TIN COATING.

  8536 90 95 · IE 2020 · IEBTI20NT-14-8966-DEC