HS subheading 8108 90 Other

Origin, preferential duty and next steps ›

• 8108 90 30 Bars, rods, profiles and wire
• 8108 90 50 Plates, sheets, strip and foil
• 8108 90 60 Tubes and pipes
• 8108 90 90 Other

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Titanium Testing Materials (Test Coupons) in square /rectangular form , machined from bar stock and used for thermal spray coating testing. Used for thermal spray coating testing.

  8108 90 50 · IE 2025 · IEBTIIENEN004-2025-BTI238

• Articles of Titanium in circular form (tensile test coupons) machined from bar stock used for thermal spray coating testing. Composition 90% Titanium

  8108 90 90 · IE 2025 · IEBTIIENEN004-2025-BTI229

• ARTICLES OF TITANIUM IN CIRCULAR FORM (TENSILE TEST BUTTONS) MACHINED FROM BAR STOCK USED FOR THERMAL SPRAY COATING TESTING. COMPOSITION 90% TITANIUM.

  8108 90 90 · IE 2017 · IE17NT-14-5329-01

• TITANIUM TESTING MATERIALS IN RECTANGULAR FORM (TEST COUPONS) 1.5" x 0.8" x 0.06" THICK, MACHINED FROM BAR STOCK AND USED FOR THERMAL SPRAY COATING TESTING

  8108 90 50 · IE 2017 · IE17NT-14-5329-02

• TITANIUM BARSTOCK WHICH ARE TITANIUM ALLOY RODS 25MM IN DIAMETER AND 13 FEET IN LENGTH. THE PRODUCT COMPLIES WITH STANDARD EN 4267.

  8108 90 30 · IE 2017 · IE17NT-14-5284

• SET SCREW. THIS IS A CUSTOM DESIGNED SCREW OF TITANIUM IT SCREWS INTO A CONNECTOR BLOCK ON THE DEVICE TO MAKE ELECTRICAL AND MECHANICAL CONNECTIONS BETWEEN THE PULSE GENERATOR AND LEADS CONNECTED TO IT. THE SCREW IS NOT USED FOR ANY OTHER PURPOSE. IT IS THREADED INTERNALLY AND HAS THREE CONNECTION OPENINGS ON 3 DIFFERENT FACES. IT HAS A TENSILE STRENGTH OF 71,000 PSI

  8108 90 90 · IE 2017 · IE17NT-14-5217-03

• BACK UP BAND IS COMPOSED OF TITANIUM AND IT IS PLACED INSIDE A DEVICE TO PREVENT ANY WELD SPLATTER INSIDE THE DEVICE AS THE WELDING PROCESS TAKES PLACE. IT IS SPECIFICALLY DESIGNED FOR EACH PRODUCT FAMILY. IT IS COLD STAMPED FROM SHEET TITANIUM AND FURTHER ANNEALED. IT MEASURES LENGTH 112.88MM X WIDTH 1.98MM X THICKNESS .20MM.

  8108 90 90 · IE 2017 · IE17NT-14-5217-01

• ANCHOR BRACKET/POST. THIS PART IS USED TO ALIGN THE HEADER OF A PACEMAKER/DEFIBRILLATOR TO PREVENT THE HEADER FROM DETATCHING BEFORE THE DEVICE IS SEALED. THIS IS PART OF THE FINISHED PACEMAKER/DEFIBRILLATOR AND IS COMPOSED OF TITANIUM. THE PACEMAKER/DEFIBRILLATOR ARE IMPLANTABLE DEVICES INTO THE BODY WHICH COMPENSATE FOR A DEFECT.

  8108 90 90 · IE 2016 · IE16NT-14-4480-01