CN code 8108 90 90 Other

TARIC codes (10 digits): 4

Origin, preferential duty and next steps ›

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• Articles of Titanium in circular form (tensile test coupons) machined from bar stock used for thermal spray coating testing. Composition 90% Titanium

  8108 90 90 · IE 2025 · IEBTIIENEN004-2025-BTI229

• ARTICLES OF TITANIUM IN CIRCULAR FORM (TENSILE TEST BUTTONS) MACHINED FROM BAR STOCK USED FOR THERMAL SPRAY COATING TESTING. COMPOSITION 90% TITANIUM.

  8108 90 90 · IE 2017 · IE17NT-14-5329-01

• SET SCREW. THIS IS A CUSTOM DESIGNED SCREW OF TITANIUM IT SCREWS INTO A CONNECTOR BLOCK ON THE DEVICE TO MAKE ELECTRICAL AND MECHANICAL CONNECTIONS BETWEEN THE PULSE GENERATOR AND LEADS CONNECTED TO IT. THE SCREW IS NOT USED FOR ANY OTHER PURPOSE. IT IS THREADED INTERNALLY AND HAS THREE CONNECTION OPENINGS ON 3 DIFFERENT FACES. IT HAS A TENSILE STRENGTH OF 71,000 PSI

  8108 90 90 · IE 2017 · IE17NT-14-5217-03

• BACK UP BAND IS COMPOSED OF TITANIUM AND IT IS PLACED INSIDE A DEVICE TO PREVENT ANY WELD SPLATTER INSIDE THE DEVICE AS THE WELDING PROCESS TAKES PLACE. IT IS SPECIFICALLY DESIGNED FOR EACH PRODUCT FAMILY. IT IS COLD STAMPED FROM SHEET TITANIUM AND FURTHER ANNEALED. IT MEASURES LENGTH 112.88MM X WIDTH 1.98MM X THICKNESS .20MM.

  8108 90 90 · IE 2017 · IE17NT-14-5217-01

• WELD RING WHICH IS PLACED INSIDE A PACEMAKER/DEFIBRILLATOR TO FACILITATE THE SEAL OF OUTER CASE HALVES AS THE WELDING PROCESS TAKES PLACE.

  8108 90 90 · IE 2016 · IE16NT-14-4480-02

• ANCHOR BRACKET/POST. THIS PART IS USED TO ALIGN THE HEADER OF A PACEMAKER/DEFIBRILLATOR TO PREVENT THE HEADER FROM DETATCHING BEFORE THE DEVICE IS SEALED. THIS IS PART OF THE FINISHED PACEMAKER/DEFIBRILLATOR AND IS COMPOSED OF TITANIUM. THE PACEMAKER/DEFIBRILLATOR ARE IMPLANTABLE DEVICES INTO THE BODY WHICH COMPENSATE FOR A DEFECT.

  8108 90 90 · IE 2016 · IE16NT-14-4480-01

• SET SCREW. THIS IS A CUSTOM DESIGNED SCREW MADE FROM TITANIUM WHICH IS PART OF A PACEMAKER/DEFIBRILLATOR IMPLANTED INTO A PATIENT. IT SCREWS INTO A CONNECTOR BLOCK ON THE PACEMAKER/DEFIBRILLATOR TO MAKE ELECTRICAL AND MECHANICAL CONNECTIONS BETWEEN IT AND LEADS CONNECTED TO IT. THIS SCREW IS NOT USED FOR ANY OTHER PURPOSES.

  8108 90 90 · IE 2016 · IE16NT-14-4476-03

• FORGING OF TITANIUM WITH SOLID CROSS-SECTION AND MINIMUM TITANIUM CONTENT OF 82.93%

  8108 90 90 · IE 2014 · IE14NT-14-2079-03