HS subheading 8483 10 Transmission shafts (including cam shafts and crank shafts) and cranks

Origin, preferential duty and next steps ›

• 8483 10 21 Of cast iron or cast steel
• 8483 10 25 Of open-die forged steel
• 8483 10 29 Other
• 8483 10 50 Articulated shafts
• 8483 10 95 Other

Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.

• A CRANK IS MADE FROM PRESS STEEL, APPROXIMATE DIMENSION 2.3 X 1.8 CM, FOR USE IN THE ASSEMBLY TO A TURBO CHARGER ACTUATOR. THE ACTUATOR THEN CONTROLS THE VALVE ON A TURBO CHARGER WHICH IN TURN CONTROLS THE SPEED OF A TURBO CHARGER. THE ACTUATOR IS ATTACHED TO AN AUTOMOTIVE ENGINE.

  8483 10 29 · GB 2019 · GBBTI504211995

• METAL SHAFT WHICH INCORPORATES GEARING. TO BE USED WITHIN A TOOLING MACHINE. PRODUCT COMPRISES OF A METAL ROLLER, COMPLETE WITH GROOVES AND ATTACHMENTS AT EITHER END.

  8483 10 95 · GB 2015 · GB502604394

• A CRANKSHAFT, USED IN AUTOMOTIVE (PASSENGER CAR) ENGINES. MADE OF CAST IRON. USUALLY PACKED IN CARDBOARD BOXES.

  8483 10 21 · GB 2013 · GB122588765

• A CAMSHAFT. MADE OF CAST IRON AND MILD STEEL. USED IN AUTOMOTIVE (PASSENGER CAR) ENGINES. PACKED IN CARDBOARD BOXES.

  8483 10 95 · GB 2012 · GB122410627

• A DIESEL ENGINE CAMSHAFT WITH GEAR. THE GEARS ON THE END OF THE CAMSHAFT ARE DRIVEN BY THE GEAR CHAIN, WHICH ITSELF IS DRIVEN FROM THE CRANKSHAFT GEAR AT THE LOWER END OF THE ENGINE. AS THE CAMSHAFTS ROTATE THEY OPERATE THE ENGINE VALVES, WHICH OPEN AND CLOSE ALTERNATELY, ALLOWING THE AIR INTO THE ENGINE (INLET CAM) AND EXHAUST GASES OUT (EXHAUST CAM). THE CAMSHAFT IS MADE OF CAST IRON AND THE…

  8483 10 95 · GB 2012 · GB121633018

• PROP SHAFT FOR USE IN THE INDUSTRIAL MANUFACTURE OF MOTOR VEHICLES. THE PROP SHAFT IS MADE OF METAL AND HAS AN ARTICULATED JOINT.

  8483 10 50 · GB 2007 · GB116557861

• NEW CRANKSHAFT FOR 1965 NORTON ELECTRA MOTORCYCLE PETROL ENGINE, INTERNAL COMBUSTION ENGINE.

  8483 10 41 · GB 2004 · GB113551114

• THIS ECCENTRIC CAM IS PART OF A JUICER. THE SHAFT FITS THROUGH A BORE OF A BEARING WHICH IS OFF CENTRE. THE SHAFT AGITATES IN THE HOLE TO ROTATE THE SHAFT TO WORK THE GEAR MECHANISM. IT IS MADE OF STEEL.

  8483 10 80 · GB 2004 · GB112936974