HS subheading 8538 90 Other
HS subheading 8538 90 covers other (Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537).
- EUDR
- Not in scope
- Level
- HS subheading
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.
Importing into the EU
Codes under 8538 90
Goods that have been classified here
Examples from the EU database of Binding Tariff Information (BTI). A ruling binds only its holder and many have expired — read them as guidance, not as a decision for your product.
Main printed circuit board for a residual current device module. This board integrates the electronic control circuitry and the mechanically latched trip mechanism used in a Socket-outlet Residual Current Device (SRCD system). It comprises of a solenoid actuator, magnetic assembly, plunger, contact bridge, concentrator components, reset button, springs, and connection interfaces to the sensing…
Residual current monitor. Intended for the detection of DC Residual currents in Mode 3 EV charging systems. It comprises of a current transformer with 14mm aperture, and a Sensor PCB intended to be mounted directly onto a printed circuit board. It may be used to detect 6mA DC Residual Current in DC, single phase or 3 phase installations. When a Residual Fault Current that exceeds the rated DC…
A Printed Circuit Board Assembly. It forms part of a Residual Current Device (RCD) module. The function of the sensing board is to detect a change in current and signal to the main PCB to activate disconnection when a residual current above the threshold (10 or 30 mA) is detected. It includes passive and active electronic components for signal conditioning, voltage regulation, and control…
RESIDUAL CURRENT DETECTION MODULE CONSISTING OF A SENSOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) AND A FOUR-POLE CURRENT TRANSFORMER (CT). BOTH COMPONENTS ARE DESIGNED FOR INTEGRATION WITHIN THE HOUSING OF A RESIDUAL CURRENT CIRCUIT BREAKER. THE PCBA CONNECTS DIRECTLY TO THE CT VIA DEDICATED TERMINALS AND PROVIDES AN ELECTRICAL OUTPUT SIGNAL FOR THE TRIP OR ALARM CIRCUIT. THE MODULE IS…
PART USED IN AN ELECTRICAL GEAR SHIFT CONTROL PANEL OF A CAR. ITS FUNCTION IS TO ACT AS A GUIDE DURING ROTATION TO FACILITATE THE CAR OWNER TO CHANGE GEARS IN THE CAR. IT IS A MOULDED PART MADE FROM PBT AND TPE RAW MATERIAL.
ELECTRONIC SENSOR MODULE DESIGNED TO DETECT AN ARC FAULT CURRENT IN AC INSTALLATIONS (230V, 50HZ). UPON DETECTING A FAULT, IT SENDS A 5 V OUTPUT PULSE TO ACTIVATE THE SCR, WHICH IN TURN TRIGGERS A TRIP COIL OR RELEASE MECHANISM TO ISOLATE THE CIRCUIT. THE MODULE IS NOT A STAND ALONE DEVICE AND IS INTENDED FOR INTEGRATION INTO ARC FAULT DETECTION DEVICE (AFDD) CIRCUIT BREAKERS FOR USE IN 230V…
A sensor PCB. It acts as an interface module for a residual current monitoring system. The PCB filters the signals and processes them through its main chip and then sends an output signal to the main system if it detects a fault. It is powered from a 12 V DC supply and provides the necessary electronics to compare the current signal against the rated residual fault threshold (6 mA DC). When the…
A plastic cover suitable for use solely with microwave sensors.
Search your own product
Describe the product in your own words and Klassio suggests a CN code with reasoning, duty and EUDR status.